Meridian America Link/Customer Controlled Routing manual

312Chapter 12: Meridian 1 configuration for Meridian Link/CCR

Enable ESDI or MSDL port (X11 Release 18 or later)

Commands in LD 48 require a port or link parameter, which is indicated in the prompts as xx. Substitute the appropriate port or link number when using the prompts listed below.

Table 110

LD 48ÑLink Diagnostic

Command	Comment
ENL AML xx ACMS	Enable the AML on port xx (ESDI only)
ENL AML xx	Enable the AML on port xx (MSDL only)

The following commands may be used for diagnostic purposes:

STAT AML xx	Show the status of the AML link.
ENL AML xx aaa	Enable link xx or option aaa. Options include
	(none)	- no additional option
	LYR2	- enable link layer 2
		(MSDL must be enabled first)
	FDL	- forced download of AML software
		(MSDL must be enabled and all AML
		I/O ports disabled first)
	AUTO	- enable auto recovery of AML
		(MSDL only)
	LYR7	- enable application layer (7)
		(AML must be established first)
	MDL	- enable MDL error reporting (MSDL only)
		(AML must be enabled first)
	MON	- enable debug monitoring (MSDL only)
		(AML must be enabled first)
	ACMS	- enable and start the AML on port xx
		(ESDI only)
ENL MSGI/MSGO	Enable message input/output monitoring (xx=link)
xx
DIS MSGI/MSGO	Disable message input/output monitoring (xx=link,
xx yy	yy=priority)

Ñ continued Ñ

553-3202-210 Standard October 1998