Meridian America Link/Customer Controlled Routing LaserJet series III printer switch settings

270Chapter 10: Installing peripheral devices

LaserJet series III printer switch settings

Use the [Menu] key on the front panel to check and set the options. Press the [Menu] key to access the first group of settings. Hold the [Menu] key down for about five seconds (the printer is offline) to access the second group of settings. Press the + or Ð (minus) key until the correct setting appears to change an option. Press [Enter]/[Reset Menu] to save a selection. Press the [Menu] key to continue. Press the [Online] key to exit from the menu.

Table 100 shows the correct option settings for use with CCR.

Table 100

LaserJet series III printer switch settings

Press [Menu] key to see the			Hold [Menu] key five seconds to
following function			see the following setting
COPIES	=	01	AUTO CONT	=	OFF
FONT SOURCE	=	1	I/O	=	SERIAL
FONT NUMBER	=	00	SERIAL	=	RS-232
PAPER	=	LETTER	BAUD RATE	=	9600
ORIENTATION	=	P	ROBUST XON	=	ON
FORM	=	066 LINES	DTR POLARITY	=	HI
MANUAL FEED	=	OFF	RET	=	DARK
SYM SET	=	ROMAN 8	PAGEPROTECT	=	OFF

553-3202-210 Standard October 1998