Meridian America Link/Customer Controlled Routing manual Change password prompts Maint chgpasswd

396Chapter 14: Software installation, upgrade, and update procedures

Procedure 1: Application configuration and start-up (continued)

21You are prompted to reboot the system (Figure 144). Type y and press [Return].

The appearance of the ÒConsole Login:Ó prompt indicates that the new package is now installed. You may now log in to the system to perform other commands. You may also restore configuration files and data files from backup if necessary (Procedure 8: Restore configuration files and data files from the backup tape).

22For security, change the maint and other appropriate passwords. To do this, log in as maint. The default password is maint.

The prompts are shown in Figure 114 with your input in bold. Substitute your password for the xxxxx.

Figure 114

Change password prompts

maint> chgpasswd

These login IDs may be changed: maint

mlusr ccrusr

Enter userÕs login ID [?, q]: maint

New password: xxxxx

Re-enter new password: xxxxx

Do you want to change the password on another login? [y, n, q] n

23If you have just installed a new IPE Module or Application Module, go to Chapter 15, ÒLink configurationÓ to continue the configuration and start-up process.

If you have just added Meridian Link Release 5C or CCR Release 3C, you can now use it.

553-3202-210 Standard October 1998