Meridian America Link/Customer Controlled Routing manual Procedure 10 Verify the installation

Chapter 14: Software installation, upgrade, and update procedures 475

Procedure 10: Verify the installation

This procedure assumes that you have

¥loaded the operating system (using Procedure 5 or 6)

¥rebooted the operating system (using Procedure 7)

¥loaded the application tape (using Procedure 8)

¥restored the Release 2 configuration files and data files (using Procedure 9)

This procedure verifies that Meridian Link Release 5C and CCR Release 3C have been installed completely and correctly.

1At the ÒConsole Login:Ó prompt, type maint and press [Return].

2You are prompted for a password. Type the password and press [Return]. The default password is maint.

3At the Òmaint>Ó prompt, type fileverif and press [Return].

Messages appear as shown in Figure 256.

Figure 256

File verification messages

FILE VERIFICATION AS OF 09/20/93 12:13:01

................................................................

................................................................

................................................................

................................................................

................................................................

Static file verification found everything to be in order.

................................................................

................................................................

................................................................

................................................................

................................................................

Permissions and ownership tests found everything in order.

Structural verification found maint data files to be in order.

4Type exit and press [Return] to go to the ÒConsole Login:Ó prompt.

Meridian Link and CCR have now been installed and verified.

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide