Meridian America Link/Customer Controlled Routing manual

514Chapter 16: Additional application configuration

Procedure 23: Configuring printer ports (continued)

Figure 284

Port state prompt

Available states:
off (printer)	on (terminal)

Select a state (default: ÒoffÓ):

5You are prompted to select a state (ÒoffÓ selects a printer; ÒonÓ selects a terminal). To configure the port as a printer, type off and press [Return].

Figure 285

Baud rate prompt

Available BAUD Rates:
1200	2400	9600
Select a BAUD rate (default: 9600):

6You are prompted to select a baud rate. Press [Return] to leave the baud rate unchanged.

Figure 286

Port configuration confirmation

STATE = off

BAUD = 9600

Do you want to install these new characteristics (y/n)?

7You are prompted on whether you want to install these new characteristics. Type y and press [Return] to indicate that you wish to apply your changes.

The portconfig command executes and you return to the Òmaint>Ó prompt.

8At the Òmaint>Ó prompt, type printconfig and press [Return].

The printer configuration menu appears.

553-3202-210 Standard October 1998