Meridian America Link/Customer Controlled Routing Dupx Full, Bps, Clok INT, Iadr, Radr, Lctl YES

300Chapter 12: Meridian 1 configuration for Meridian Link/CCR

Table 106

LD 17ÑConfigure ESDI port (Options 21Ð81) (continued)

Prompt	Response	Comment
DUPX	FULL	Full duplex mode
BPS	19200	19,200 bps baud rate (19.2 kbps). (The
		baud rate for link 0 of the Application Module
		must also be set to 19,200 bps.)
CLOK	INT	Internal clock
IADR	3	Internal address for AML LAPB
RADR	1	Remote address for AML LAPB
LCTL	YES	Modify link control parameters
T1	4	Layer 2 retransmission timer in units of 0.5
		seconds
T2	0	Layer 2 acknowledge timer in units of 0.5
		seconds
T3	10	Layer 2 link set-up timer in units of 0.5
		seconds (only for ESDI)
N1	128	Maximum I frame length in octet
N2	8	Maximum number of Layer 2 retransmission
K	1Ð(7)	Maximum number of outstanding frames
		Note: This number must match the value
		set for Link 0 on the Meridian Link.
LTHR	<cr>
USER	CMS	ESDI port is a Command and Status link
ADAN	<cr>
VAS	NEW	Value Added Server Identifier (VAS ID)
VSID	0Ð15	VAS (AML) identifier
DLOP	<cr>
		ÑcontinuedÑ

553-3202-210 Standard October 1998