Meridian America Link/Customer Controlled Routing Meridian 1 configuration for Meridian Link/CCR

298Chapter 12: Meridian 1 configuration for Meridian Link/CCR

¥A Meridian 1 with a single IPE Module or Application Module active and a redundant Meridian Link (another IPE Module or Application Module on warm standby mode):

ÑVSID prompt (LD17) Enter a value to define the VAS ID to be associated with the AML.

ÑAML prompt (LD17) Enter the first ESDI or MSDL port number to be associated with the VAS ID.

ÑAML prompt (LD17) Enter the second ESDI or MSDL port number to be associated with the VAS ID.

ÑVSID prompt (LD15) Enter the value from the VSID prompt in LD17.

ÑVSID prompt (LD23) Enter the value from the VSID prompt in LD17.

ÑHSID prompt (LD23) Do not enter a value.

If you have a system with a single IPE Module or Application Module and you want to add either Meridian Link or CCR to create a co-resident system, you do not need to change the values entered at the VSID, HSID, or AML prompts.

If you have a system with two modules, one of which has Meridian Link (but not CCR) activated, the other of which has CCR (but not Meridian Link) activated, and you want to create a co-resident system by removing one module and activating both applications on the remaining module, you must make changes to the values entered at the VSID, HSID, and AML prompts. You should choose a configuration that requires the fewest changes.

553-3202-210 Standard October 1998