Meridian America Link/Customer Controlled Routing manual Standard October

122Chapter 8: Hardware installation procedures

3Slowly slide the module along the slots into the shelf or cabinet, making sure the latches at the top and bottom of the module are unlatched. Press the faceplate to ensure that the module is firmly in place. Make sure the latches at the top and bottom of the module are secured.

4For information on cabling the IPE Module to external equipment, refer to the ÒMeridian Link/CCR cabling interfaceÓ chapter.

Note: Return to Chapter 5, ÒHardware installation overviewÓ for the next procedure.

Figure 30 shows the port configuration settings on the CPU adapter card.

553-3202-210 Standard October 1998