Meridian America Link/Customer Controlled Routing Subnet mask prompt, List verification prompt

Chapter 14: Software installation, upgrade, and update procedures 391

Procedure 1: Application configuration and start-up (continued)

Figure 104

IP address prompt

Meridian Link using a TCP/IP connection.

If you would like a default gateway IP address configured or changed, please enter the IP address in internet dot notation (e.g. 47.82.45.10). For no change enter <cr>:

13To configure or change a default gateway IP address, type the IP address in the proper format and press [Return]. If no modification or configuration is required, simply press [Return].

Figure 105

Subnet mask prompt

Saving default gateway IP address:

If you would like a default subnet mask configured or changed,

please enter the subnet mask (e.g. 255.255.0.0). For no change enter <cr>:

14To configure or change a default subnet mask, type the subnet mask address in decimal format and press [Return]. If no modification or configuration is required, simply press [Return].

Figure 106

List verification prompt

Saving default subnet mask:

The following applications are configured:

Meridian Link

Large CCR

The following packages are configured: 1 96 97 98 99 100 101

Ethernet NSE software is enabled.

Is this correct (y/n/q)?

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide