528 Chapter 18: Acceptance testing
553-3202-210 Standard October 1998
4Type exit and press [Return] to go to the ÒConsole Login:Ó prompt.
CCR or Meridian Link or both have now been installed and verified.
5Unlock the tape drive and remove the tape.
To ensure that CCR is working correctly, you may want to create a simple
script and execute it. For information on creating and executing a script,
refer to the CCR User Guide (P0747008).
Note: If you have never written a script nor used script commands,
you may need to refer to someone who has, such as a CCR
administrator.
1Log into CCR by typing ccrusr and pressing Return.
2When prompted, type the password and press [Return]. The default
password is ccrusr.
3When prompted, type in a user ID (such as 0001) and press
[Return].
4When prompted, type in the user password (such as admin) and
press [Return].
5Write a simple script. Refer to the chapter ÒWriting scriptsÓ in the
CCR User Guide.
6Validate the script to confirm its accuracy. Refer to the chapter on
ÒWriting scriptsÓ in the CCR User Guide.
7Correct any errors found during validation.
8Install the script. Refer to the chapter ÒWriting scriptsÓ in the CCR
User Guide.
9Associate the script to a CDN. Refer to the chapter ÒAssociating
CDNs and scriptsÓ in the CCR User Guide.
10 Execute the script by dialing the CDN.