Meridian America Link/Customer Controlled Routing Installing an IPE Module Procedure Reference

88Chapter 5: Hardware installation overview

Installing an IPE Module or an Application Module

This section summarizes the steps required to install an IPEÊModule and an Application Module.

It is important to follow the list of procedures in the order in which they appear below. When you have completed each procedure, return to this list for the next procedure.

Table 11

Installing an IPE Module

	Procedure	Reference
1.	Go through Chapter 6, ÒSite survey/installation checklist.Ó	Page 91
2.	Go through Chapter 7, ÒUnpack and inspect hardware.Ó	Page 115
3.	Install an SDI/DCH, ESDI, or MSDL card (if required).	Page 142 (SDI/DCH)
	See Chapter 8, ÒHardware installation procedures.Ó	Page 145 (ESDI or MSDL)
4.	Install the IPE Module. See Chapter 8, ÒHardware	Page 119
	installation procedures.Ó
5.	Cable to external equipment. See Chapter 9, ÒMeridian	Page 177 (Option 11)
	Link/CCR interface cabling.Ó	Page 209 (Options 21Ð81)
6.	Install the peripheral devices. See Chapter 10, ÒInstalling	Page 261
	peripheral devices.Ó
7.	Configure the Meridian 1. See Chapter 12, ÒMeridian 1	Page 293
	configuration for Meridian Link/CCR.Ó
8.	Configure the links. See Chapter 15, ÒLink configuration.Ó	Page 479
9.	Install the base operating system and the applications. See	Page 371
	Chapter 14, ÒSoftware installation, upgrade, and update
	procedures.Ó
10.	Configure the applications. See Chapter 16, ÒAdditional	Page 503
	application configuration.Ó

553-3202-210 Standard October 1998