Security MENU - Here you can lock down your amplifier to prevent any access to the settings. The DEFAULT screen is still active and you can select any of the four presets... but that is it!
UNLOCK AMPLIFIER
You do remember your lock code right? You better because that is now the only way in! If you have not changed it then it is still at the factory default of 123.
UNLOCK AMPLIFIER - cont.
If you enter the wrong code the display will flash the mes- sage BAD CODE and then return you to UNLOCK screen.
AMP1 AMP2
You will need to call KICKER directly at (405)
Operation
Press the ENT key to enter the KOMPRESSOR menu.
Use the UP and DOWN keys to
select LOCK IT UP or DON’T LOCK
and then press the ENT key to accept your setting.
ESC HOME ENT
ESC HOME ENT
To unlock your amplifier press the ENT key. The display will show UNLOCK. Press the ENT key again. You will now enter your code to unlock the amplifier.
The ESC and ENT keys move the blinking cursor left or right to select
2 Times
ESC HOME ENT
ESC HOME ENT
LOCK LEFT SYS RIGHT MUTE
GAIN EQ LPF HPF PHASE KOMP
bad code
AMP1 AMP2
LOCK LEFT SYS RIGHT MUTE
GAIN EQ LPF HPF PHASE KOMP
unlock
Press the ENT key to enter your
lock your code again. | ESC | HOME ENT |
So...before you call, gather this information up and have it ready to save us some time on the phone. Cool? Cool!
Better yet, take the time RIGHT NOW to fill out the first page in this manual and STAPLE your receipt to it. That way if or when you need service (like forgetting your lock code) you will have all the information you need right there in front of you.
Operation
If you selected LOCK IT UP the display will now show UNLOCK.and the LOCK indicator will be on. The menus are now locked. Press the ESC key to return to the DEFAULT scrolling screen.
AMP1 AMP2
LOCK LEFT SYS RIGHT MUTE
GAIN EQ LPF HPF PHASE KOMP
unlock
If you selected DON’T LOCK then you will return to the MAIN menu and the amplifier will remain unlocked.
NOTE...
While your amplifier is in lock down you will notice the LOCK indicator on the ISIS VFD display is lit. This indicates your amplifier is locked down and will require a code to unlock it
which character to enter.
Use the UP and DOWN keys to enter the character.
(A, B, C...1, 2, 3...etc)
When you are finished press and hold the HOME key for 1.5 seconds to enter your unlock code.
ESC HOME ENT
ESC HOME ENT
Enter your code again making sure to place the correct character in the correct position in the display. Blank spaces count as part of the code so be sure you are entering it correctly.
Press the HOME key and try again. If you have found your error then the amp will unlock. If not, the flashing BAD CODE will greet you and you can try again.
If you have tried several times (several is defined as more than 3...less than 10) and you still can not unlock your amplifier, this more than likely means means you have forgotten your lock code.
before any adjustments can be made.
If the code is correct the amp will unlock and drop you back
into the security menu. If not, then read on...
26 | SX .2 Series Amplifiers |
SX .2 Series Amplifiers | 27 |