Specifications

Specifications

to

 

all

 

models

common

.

 

Height:

2.5 inches / 6.35 centimeters

Width:

10 inches / 25.4 centimeters

Length Without EndKaps:

Subtract 5 inches (12.7 cm) from chart above

Frequency Response:

20 Hz - 20 kHz, +0 / -1 dB

Input Sensitivity:

62.5 mV - 16 V

Signal-t0-Noise Ratio:

>100 dB

High Pass Crossover Freq.:

10 Hz - 16 kHz in 1/12 Octave steps

High Pass Crossover Slope:

0 (off) - 36 dB in 6 dB steps

Low Pass Crossover Freq.:

30 Hz - 20 kHz in 1/12 Octave steps

Low Pass Crossover Slope:

0 (off) - 36 dB in 6 dB steps

KickEQ Frequency:

20 Hz - 20 kHz in 1/12 Octave steps

KickEQ Bandwidth (Q):

.5 to 10 in .5 steps

KickEQ Boost/Cut:

+/- 18 dB per Octave

Remote Bass Level Control:

Included with each amplifier

Power & Ground Terminals:

Will accept up to 2 Gauge wire

DSP Reaction Time / Delay:

.7 milliseconds (In other Words...Real Fast!)

Friend’s Reaction:

That Shizzle's Off The Hizzle

Stranger’s Reaction:

Dude...Sweet...

ELECTRONICS LIMITED WARRANTY

Kicker warrants this product to be free from defects in material and workman- ship under normal use for a period of 90 DAYS from date of original purchase with receipt. When purchased from an Authorized KICKER Dealer it is warranted for TWO (2) YEARS from date of original purchase with receipt. If the product is labeled “B Stock” it is warranted for 90 DAYS from date of original purchase with receipt. If labeled “B Stock” and purchased from an Authorized KICKER Dealer, it is warranted for ONE (1) YEAR from date of purchase with receipt. In all cases you must have the original receipt! Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction during the warranty period, Kicker will replace or repair (at its discretion) the defective mer- chandise with equivalent merchandise at no charge. Warranty replacements on “B-Stock” merchandise may have cosmetic scratches and blemishes. Discontinued products may be replaced with more current equivalent products.

This warranty is valid only for the original purchaser and is not extended to owners of the product subsequent to the original purchaser. Any applicable implied warranties are limited in duration to a period of the express warranty as provided herein beginning with the date of the original purchase at retail, and no warranties, whether express or implied, shall apply to this product thereafter. Some states do not allow limitations on implied warranties, therefore these exclusions may not apply to you.

This warranty gives you specific legal rights; however you may have other rights that vary from state to state.

WHAT TO DO IF YOU NEED WARRANTY OR SERVICE

Defective merchandise must be returned to your local Authorized Stillwater Designs (Kicker) Dealer for warranty. Assistance in locating an Authorized Dealer can be obtained by writing or calling Stillwater Designs direct. You can confirm that a dealer is authorized by asking to see a current authorized dealer window decal.

If it becomes necessary for you to return defective merchandise, call the Kicker Customer Service Department at (405)624-8510 for a Return Authorization (RMA) number. Package all defective items in the original container or in a pack- age that will prevent shipping damage, and return to

Stillwater Designs, 5021 North Perkins Road, Stillwater, OK 74075

The RMA number must be clearly marked on the outside of the package. Return only defective components. Return of entire cabinets, system packs, pairs, etc. increases your return freight charges. Non-defective items received will be returned freight collect.

Include a dated proof-of-purchasestating the Customer name, Dealer name, product purchased and date of purchase. Warranty expiration on items without proof-of-purchase will be determined from type of sale and the manu- facturing date code. Freight must be prepaid; items received freight collect will be refused.

Failure to follow these steps may void your warranty. Any questions can be directed to the Kicker Customer Service Department at (405)624-8510.

WHAT IS NOT COVERED?

This warranty is valid only if the product is used for the purpose for which it was designed.

It does not cover:

Damage due to improper installation.

Subsequent damage to other components.

Damage caused by exposure to moisture, excessive heat, chemical cleaners, and/or UV radiation.

Damage through negligence, misuse, accident or abuse. Repeated returns for the same damage may be considered abuse.

Any cost or expense related to the removal or reinstallation of product.

Speakers damaged due to amplifier clipping or distortion.

Items previously repaired or modified by any unauthorized repair facility.

Return shipping on non-defective items.

Products with tampered or missing barcode labels.

Products returned without a Return Authorization (RMA) number.

Freight Damage.

The cost of shipping product to Kicker.

Service performed by anyone other than Kicker.

Speaker with any foreign caulk used for gasket material.

HOW LONG WILL IT TAKE?

Kicker strives to maintain a goal of 24-hour service for all returns. Delays may be incurred if lack of replacement inventory or parts is encountered.

INTERNATIONAL WARRANTY

Contact your International Kicker dealer or distributor concerning specific procedures for your country’s warranty policies.

P.O. Box 459 • Stillwater, Oklahoma 74076 • U.S.A. • 405 624-8510

KICKER drivers are capable of producing sound levels that can permanently damage your hearing! Turning

WARNING: up a system to a level that has audible distortion is more damaging to your ears than listening to an undistorted system at the same volume level. The threshold of pain is always an indicator that the sound level is too loud and may permanently damage your hearing.

Please use common sense when controlling volume!

Warranty

34

SX .2 Series Amplifiers

SX .2 Series Amplifiers

April 2003 35

Page 18
Image 18
Kicker SX500.2 manual Height, Width, Length Without EndKaps, Frequency Response, Input Sensitivity, Signal-t0-Noise Ratio

SX400.2, SX900.2, SX500.2, SX600.2 specifications

Kicker has established itself as a prominent name in the audio industry, known for producing high-quality amplifiers that cater to a variety of audio setups. Among its esteemed lineup are the Kicker SX600.2, SX500.2, SX900.2, and SX400.2 amplifiers. Each model is designed to deliver powerful performance while ensuring clarity in sound reproduction, making them ideal for both casual listeners and serious audiophiles.

The Kicker SX600.2 is a robust 2-channel amplifier that features a maximum power output of 600 watts. This amplifier is engineered to drive speakers with ease, providing an impressive peak output that is complemented by Kicker's innovative technology. The SX600.2 incorporates a variable high-pass filter, which allows users to fine-tune the frequency response, ensuring clean, distortion-free sound even at higher volumes. The amplifier's compact design makes it suitable for tight spaces, while its durable construction ensures longevity, making it perfect for both cars and home audio systems.

Moving on to the SX500.2, this model offers a maximum output of 500 watts and is particularly popular among those looking for capable and versatile amplification. Similar to the SX600.2, it features a variable high-pass filter, catering to a variety of speaker types. This amplifier is lightweight and features a sleek design, making it a great fit for modern audio setups. Its advanced circuitry minimizes heat production and distortion, allowing users to enjoy clear sound without interruption.

The Kicker SX900.2 is a powerhouse that boasts an impressive 900 watts of maximum output, allowing it to drive even the largest speaker systems. This 2-channel amplifier excels in delivering deep bass without compromising on treble clarity. Its smart thermal management system ensures that the amplifier operates efficiently, even during extended use. The SX900.2 also features adjustable gain control, making it easy to integrate with existing audio systems, while its rugged design stands up to the challenges of any environment.

Finally, the SX400.2 is a perfect choice for those needing a reliable yet compact amplifier. With a maximum output of 400 watts, it offers ample power for smaller setups without overwhelming the system. The SX400.2 features both low-pass and high-pass filters for optimal sound customization, ensuring a balanced audio experience. Its durable construction and efficient design make it a dependable choice for both mobile and stationary applications.

In summary, Kicker's SX series amplifiers, including the SX600.2, SX500.2, SX900.2, and SX400.2, offer distinct advantages in power, performance, and versatility. Each amplifier incorporates advanced technologies and user-friendly features, catering to a diverse range of audio enthusiasts looking to elevate their sound experience. Whether for car audio systems or home setups, Kicker continues to deliver exceptional quality and innovation.