Kicker manual Two Channel Models SX400.2 / SX500.2 / SX600.2 / SX900.2, Features

Introduction				SX .2 Series
				Amplifier
				Owners Manual
		Two Channel Models: SX400.2 / SX500.2 / SX600.2 / SX900.2
		Attention:		Congratulations!
		Please take a moment and record the information		You have just purchased the latest in amplifier
		asked for below in the provided area. It is also a good
				technology to carry the famous KICKER name.
		idea to attach the original sales receipt or a copy of it to
				Your KICKER SX series amplifier employs the lat-
		this page for future reference
				est in DSP signal processing to give you total
		If for any reason you require service on this amplifier		control over your sound. Like all KICKER prod-
				ucts it is designed and built to give you years
		during the warranty period, you will need to provide this
				of powerful and trouble-free performance.
		information and a copy of the receipt to Kicker to vali-
				This installation manual contains valuable infor-
		date your warranty.
				mation on how to get the most out of your
		ALWAYS KEEP YOUR RECEIPT!		new SX series amplifier.
				Thanks for buying KICKER. Enjoy!
	Dealer Where Purchased:		_____________________________________________
	Purchase Date:		_____________________________________________
	Amplifier Model Number:		_____________________________________________
	Amplifier Serial Number:		_____________________________________________

Features

Low Impedance Operation Stable into 2 ohm stereo or 4 ohm mono loads.

SORT Protection Circuitry (Short circuit, Over-voltage, Reverse polarity, Thermal) Protects amplifier from accidents and out of spec operation.

MOSFET Power Supply Provides high efficiency operation.

PAST (Pre Amp Signal Transfer) Output RCA jacks to pass the incoming signal to another amplifier or component.

SAMS (Stereo And Mono Simultaneously) Amplifier will operate into a bridged mono load and a stereo load at the same time.

Low Pass Filter Fully adjustable digital crossover with variable slope and crossover frequency. 30 Hz - 20 kHz in 1/12 octave spacing. OFF - 36 dB per octave slope in 6 dB incre- ments.

High Pass Filter Fully adjustable digital crossover with variable slope and crossover frequency. 10 Hz - 16 kHz in 1/12 octave spacing. OFF - 36 dB per octave slope in 6 dB incre- ments.

KickEQ Fully adjustable single band digital parametric equal- izer with variable Q (bandwidth), variable center frequency and variable boost or cut. Q range .5 - 10 in .5 steps. Center frequency 20 Hz - 20 kHz in 1/12 octave steps. Boost or cut range +/- 18 dB.

Adjustable Phase The output phase of each channel can be set at 0 Degrees or 180 Degrees. Left and Right channels can be linked or independently adjusted.

UltraMatch Gain Structure Digital input gain control with five selectable gain ranges (1 volt, 2 volt, 4 volt, 8 volt, 16 volt) with 12 dB of adjustment in each range in .5 dB steps.

Left and Right channels can be linked or adjusted independ- ently.

SickBay and On Board Diagnostics Various tools to troubleshoot installation issues and check amp status.

Kompressor A 4-setting, user-selectable bass compressor used to fatten up your sub bass. OFF, TIGHT, CONTOUR and ATTACK with +/- 24 dB of adjustment to compensate for speaker size or listening style.

ISIS (pronounced eye-sis) (Indicate Status & Input Settings) The user interface to view or adjust current settings and check the status of your Kicker SX amplifier.

BLAST Port (Bass Level And Signal Transfer) Provides Remote Bass Level Control and control signal transfer between multiple SX amplifiers.

EndKaps Cast aluminum, custom, removable covers to pro- tect and hide all your wiring connections to the amplifier. Can be prepped and painted any custom color you choose.

SASA (Shake A Stick At) So many more features...it is more than you can Shake A Stick At. (It’s an Oklahoma thing!) Read on to find out!

Features

2 SX .2 Series Amplifiers

SX .2 Series Amplifiers 3