SYSTEM MENU
7a.) CURRENT shows amplifiers current status or fault code. The 6 possible codes are:
normal - No problem, normal operation. thermal - Thermal cutoff protection engaged.
SICK BAY - cont
7c.) PINK NOISE is a built in pink noise generator to test operation of the amplifier
8.) Amp Name - Here you can assign a unique name to your KICKER SX amplifier. This name will replace the model name in the DEFAULT screen. If you change your mind and do not want to change the name, press and hold the HOME key for 1.5 seconds BEFORE making any changes.
Operation
1.) Volt Now - Displays the current voltage at the amplifiers +12 volt terminal.
2.) Volt Min - Displays the lowest voltage seen at the amplifiers +12 volt terminal since being installed.
3.) Volt Max - Displays the highest voltage at the amplifiers +12 volt terminal since being installed.
4.) Temp Now - Displays the current temperature of the amplifier.
short - Short circuit protection engaged.
SERVICE - Amp requires service by KICKER.
When you are done viewing the current status press the
ESC key to return to the SICK ESC | HOME | ENT |
BAY menu.
7b. )HISTORY logs the last 5 fault codes and how
Use the UP and DOWN keys to select NOISE ON or
NOISE OFf.
When the PINK NOISE is ON the LEFT and RIGHT indicators in the ISIS VFD will blink on and off.
ESC HOME ENT
AMP1 
AMP2
LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP
noise on
The ESC and ENT keys move the cursor left or right to select which character to change.
Use the UP and DOWN keys to change the character displayed
ESC HOME ENT
Operation
5.) Temp Max - Displays the highest temperature the amplifier has reached since being installed.
long ago they happened when compared to the RUN TIME log.
Use the UP and DOWN
When you are done using the PINK NOISE generator press the ESC key to return to the SICK BAY menu.
ESC HOME ENT
(A, B, C...1, 2, 3...etc)
ESC HOME ENT
PRESS &
6.) Run Time - Displays the total time the amplifier has been powered up since installation in 1/10th of an hour increments
7.) Sick Bay - Contains several diagnostic tools. Once in this menu you use the UP and DOWN keys to scroll through CURRENT, HISTORY and PINK NOISE options. Press the ENT
keys to select the HISTORY log entry you want to view.
Press and hold the ENT key to view the time it happened.
When you are done viewing
ESC HOME ENT
ESC HOME ENT
NOTE...
If you exit the SICK BAY menu with the PINK NOISE generator still on, the LEFT and RIGHT ISIS VFD indicators will remain blinking as a reminder.
When you are finished press and hold the HOME key for 1.5 seconds to save your new amplifier name.
HOLD
ESC HOME ENT
key to select.
ESC HOME ENT
the history press the ESC key.
ESC HOME ENT
16 | SX .2 Series Amplifiers | SX .2 Series Amplifiers | 17 |
