Meridian America Link/Customer Controlled Routing To update CCR from Release 3 to Release 3C

384Chapter 14: Software installation, upgrade, and update procedures

Section 10: To update CCR from Release 3 to Release 3C

If you already have CCR Release 3 and want to update to Release 3C, you must install the application and then enter a keycode to activate it.

To do this,

¥Perform Procedure 2: Start the update process.

¥Perform Procedure 3: Load application software from tape.

Section 11: To update CCR from Release 3 to Co-residency

If you already have CCR Release 3 and want to upgrade to co-residency, you must install all applications. Then you must enter a keycode to activate CCR and Meridian Link. Notice that, in this case, you automatically update CCR to Release 3C.

To do this,

¥Perform Procedure 2: Start the update process.

¥Perform Procedure 3: Load application software from tape.

553-3202-210 Standard October 1998