Meridian America Link/Customer Controlled Routing manual System clears and the messages in appear

Chapter 14: Software installation, upgrade, and update procedures 469

Procedure 8: Load the application software from tape (continued)

24You are asked whether you want to reenter the module name or address (Figure 246).

If you have not made a mistake, type n and press [Return].

If you want to reenter the module name and address, type y and press [Return]; you will return to step 22.

Figure 247

Reboot prompt

Would you like to reboot the system now (y/n) ?

25You are prompted to reboot the system (Figure 247). Type y and press [Return].

Figure 248

Reboot messages 1

INIT: New run level: 6

The system is coming down. Please wait. System services are now being stopped. Terminating Applications /usr/bin/maint: /dev/tty: cannot create cron aborted: SIGTERM

The system is down.

NOTICE: System Reboot Requested (0)

The system clears and the messages in Figure 249 appear.

Note: The following figure is illustrative only. Your messages may be different, depending on the application(s) purchased.

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide