Meridian America Link/Customer Controlled Routing specs

Table 12

Installing an Application Module

	Procedure	Reference

1.	Go through Chapter 6, ÒSite survey/installation checklist.Ó	Page 91

2.	Go through Chapter 7, ÒUnpack and inspect hardware.Ó	Page 115

3.	Install an ESDI or MSDL card (if required). See Chapter 8,	Page 142 (SDI/DCH)
	ÒHardware installation procedures.Ó	Page 145 (ESDI or MSDL)

4.	Install the AEM (Application Equipment Module), if	Refer to the Application
	required.	Equipment Module
		Installation Guide
		(NTP 553-3201-200).

5.	Check the transition card option settings (if necessary).	Page 119
	See Chapter 8, ÒHardware installation procedures.Ó

6.	Install the Application Module. See Chapter 8, ÒHardware	Page 125
	installation procedures.Ó

7.	Cable to external equipment. See Chapter 9, ÒMeridian	Page 227
	Link/CCR interface cabling.Ó

8.	Install the peripheral devices. See Chapter 10, ÒInstalling	Page 261
	peripheral devices.Ó

9.	Configure the Meridian 1. See Chapter 12, ÒMeridian 1	Page 293
	configuration for Meridian Link/CCR.Ó

10.	Configure the links. See Chapter 15, ÒLink configuration.Ó	Page 479

11.	Install the base operating system and the applications. See	Page 371
	Chapter 14, ÒSoftware installation, upgrade, and update
	procedures.Ó

12.	Configure the applications. See Chapter 16, ÒAdditional	Page 503
	application configuration.Ó