Meridian America Link/Customer Controlled Routing Acceptance testing, Meridian Link/CCR, 527

527

Chapter 18: Acceptance testing

This chapter describes the various acceptance tests you can perform.

Meridian Link/CCR

After you have installed Meridian Link, CCR, or both, check that the installation was successful by following the procedure below.

This procedure assumes that you have

¥loaded the operating system (using Procedure 5 or 6)

¥rebooted the operating system (using Procedure 7)

¥loaded the application software (using Procedure 8)

¥restored the configuration files and data files (using Procedure 9)

1At the ÒConsole Login:Ó prompt, type maint and press [Return].

2You are prompted for a password. Type the password and press [Return]. The default password is maint.

3At the Òmaint>Ó prompt, type fileverif and press [Return].

Messages appear as shown in Figure 295.

Figure 295

File verification messages

FILE VERIFICATION AS OF 09/20/93 12:13:01

09/20/93 12:13:01 FILE VERIFICATION AS OF 09/20/93 12:13:01

Static file verification found everything to be in order.

Permissions and ownership tests found everything in order.

Structural verification found maint data files to be in order.

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide