Chapter 16: Additional application configuration 515
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Procedure 23: Configuring printer ports (continued)
Figure 287
Printer configuration prompt menu
CCR Line Printer Configuration Utility
1: Add a printer.
2: Delete a printer.
3: List of configured printers.
4: Status of configured printers.
5: Enable a configured printer.
6: Disable a configured printer.
7: List/Delete printer job.
Enter the number of the function you want to perform.
(Hit the <RETURN> key to EXIT)
9Type 1 and press [Return] to add a printer.
You are prompted to enter the printer name.
Figure 288
Printer name prompt
CCR ADD Printer Operation
Enter printer name:
10 Type the name you wish to use to refer to the printer and press
[Return].
The name can be up to 14 characters in length and should not
include any spaces.
You are prompted to enter the port number.
Figure 289
Port number prompt
Enter PORT number (7 - 8):
Note: The number of ports displayed in Figure 289 depends on the
number available. The example shown is for an IPE Module with co-
resident CCR and Meridian Link.