Meridian America Link/Customer Controlled Routing manual Meridian Link protocol prompt

Chapter 14: Software installation, upgrade, and update procedures 463

Procedure 8: Load the application software from tape (continued)

12You are prompted for the second group of keycode characters. Type the second group and press [Return].

Figure 234

Keycode prompt 3

Keycode group 3 (or Q or q to quit):

13You are prompted for the third group of keycode characters. Type the third group and press [Return].

Figure 235

Keycode prompt 4

Keycode group 4 (or Q or q to quit):

14You are prompted for the fourth group of keycode characters. Type the fourth group and press [Return].

Figure 236

Keycode prompt 5

Keycode group 5 (or Q or q to quit):

15You are prompted for the fifth group of keycode characters. Type the fifth group and press [Return].

A list of configured applications appears.

Note: Optional feature prompts will not appear if the features were not configured in the keycode. For example, if Meridian Link was not purchased, the prompts in Figures 237, 238, and 239 will not appear.

Figure 237

Meridian Link protocol prompt

Please enter the Meridian Link protocol, x for X.25, <cr> for TCP/IP):

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide