Meridian America Link/Customer Controlled Routing manual Transition card to the Int Modem port

222Chapter 9: Meridian Link/CCR interface cabling

Table 79

Cables from transition cards to the universal I/O panel (Application Module)

Part number	Length	Cable description and application
NT7D46AA	35 cm	9-pin (DB9) round subminiature D-style cable: connects port
(A0372653)	(14 in.)	SP1 on the MVME712A or AM transition card to the SDI link
(MVME712A/AM)		port
NT7D48AA	35 cm	25-pin (DB25) round subminiature D-style cable: connects
(A0372655)	(14 in.)	ports SP1 (ESDI port) and SP3 (host port) on
(replaced by		the MVME705B transition card to the ESDI link and Host
NT7D95AA on	22 cm	ports
newer systems)	(9 in.)
NT7D60AA*	35 cm	4-pin RJ11 to 9-pin subminiature D-style cable: connects the
(A0373962)	(14 in.)	built-in modem (teledapt connector) on the MVME712AM
(MVME712AM)		transition card to the Int Modem port
NT7D61DA	35 cm	9-pin to 25-pin subminiature D-style cable: connects port
	(14 in.)	SP4 on the MVME712A/AM card to the Spare port
NT7D79AA	35 cm	9-pin round subminiature D-style cable: connects port SP1
(A0387839)	(14 in.)	on the MVME712A or AM transition card to the SYS CONS
(MVME712A/AM)		port
NT7D95AA**	22 cm	25-pin flat subminiature D-style cable: connects SP1, SP2,
	(9 in.)	and SP3 of the NT6D51AA transition card to serial I/O ports
		1Ð3, 4Ð6, and 7Ð8

* When the MVME712A card is used, the NT7D60AA cable is replaced by an NT7D46AA cable, which connects port SP2 on the transition card to the AML.

** Used only when NT6D51AA card is present (CCR Application Module).

553-3202-210 Standard October 1998