Meridian America Link/Customer Controlled Routing manual Procedure 18 Turn off auto-start

Chapter 16: Additional application configuration 505

Procedure 18: Turn off auto-start

Meridian Link and CCR are configured by default to restart automatically any time the system is powered down and up again (for example, in the event of an unscheduled power outage). If you wish to start the CCR application manually every time the IPE Module or Application Module is rebooted, follow this procedure to turn off auto-start.

Note: This does not affect Meridian Link.

1Log in as maint. The default password is maint.

2At the Òmaint>Ó prompt, type bootconfig and press [Return].

The following prompt appears:

Figure 264

Bootconfig prompt

Application is configured to start when the system boots

Do you want to disable starting the application? [y,n]

3Type y and press [Return] to turn off auto-start.

The ÒAuto start disabledÓ prompt confirms your change.

Figure 265

Auto-start disabled message

Auto start disabled

maint>

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide