Meridian America Link/Customer Controlled Routing manual

398Chapter 14: Software installation, upgrade, and update procedures

Procedure 2: Start the update process (continued)

Figure 117

Tape insertion message screen

Insert the removable medium for the package you want to install into the ctape drive.

Press <RETURN> when ready. Type q to quit.

At this point the system is ready to be updated from a tape.

Note: Procedure 3 describes how to load the application software from tape. Procedures 5 and 6 describe how to load the BOS from tape, depending on whether your Application Module is equipped with an MVME147 or an MVME167 SBC card.

553-3202-210 Standard October 1998