Meridian America Link/Customer Controlled Routing manual Tty, Admin, Lang ENG, Additional, Ports

540Chapter 19: Single Terminal Access

Table 148

LD 17ÑConfigure MSDL port

Prompt	Response	Comment
REQ	CHG	Create or change information in the
		database
TYPE	CFN	Configuration record data block
ADAN	NEW STA x	Add STA with a logical ID x (0-15)
TTY	0-15	Device number (MSDL SDI TTY)
		Note: Use the same TTY number
		you assigned to the ADAN prompt in
		step 8.
CTYP	MSDL	Card type is MSDL (automatic
		response)
GRP	0	Network Group Number (this prompt
		only appears for Option 81 systems)
DNUM	0Ð15	Device number; same as TTY
		(automatic response)
ADMIN_	0	Admin port number (automatic
PORT		response)
LANG	(ENG)	Language supported (automatic
		response for Release 19)
ADDITIONAL	P1, P2, P3	The MSDL port(s) cabled to the SYS
PORTS*		CONS port

*If one of the ADDITIONAL PORTS must be deleted, type an ÒXÓ before the port number (for example, XP2).

12Verify the above configuration in LD 22.

13Access LD 48 and type ENL STA x to enable the STA port.

14Type STAT STA x to verify the status of the STA application.

Figure 301 shows STA 0 on port 0 (admin port) is enabled.

553-3202-210 Standard October 1998