Meridian America Link/Customer Controlled Routing manual Define non-ACD telephones as AST, Ast Yes

Chapter 12: Meridian 1 configuration for Meridian Link/CCR 341

Define non-ACD telephones as AST

To configure a DN as an AST telephone, make changes to telephone data in LD 10 for single-line telephones or LD 11 for multi-line telephones.

Table 126

LD 10ÑDefine single-line telephones as AST

Prompt	Response	Comment
REQ	NEW	Add new telephones
TYPE	500	Single-line type of telephones
TN	l s c u	Terminal number
CDEN
DES
CUST	0Ð99	Customer number
DN	xxxx	Directory number of the telephone
AST	YES	Telephone is designated as
		associated set
IAPG	(0)Ð15*	AML link status message group,
		defined in LD 15. Since Group 0
		sends no messages, the default
		value is not normally used. Group 1
		(all messages) or a customer-
		designated group (2Ð15) would
		normally be used here.
¥		Press [Return] until the REQ prompt
¥		appears
¥
REQ	NEW, END	Either define another single-line non-
		ACD telephone as AST or exit the
		overlay, saving changes

*Groups 10 through 15 are available only in X11 Release 17 or later software.

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide