Meridian America Link/Customer Controlled Routing LaserJet series IV printer switch settings

Chapter 10: Installing peripheral devices 271

LaserJet series IV printer switch settings

Use the [Menu] key on the front panel to check and set the options. Press the [Menu] key to access the first group of settings. Hold the [Menu] key down for about five seconds (the printer is offline) to access the second group of settings. Press the + or Ð (minus) key until the correct setting appears to change an option. Press [Enter]/[Reset Menu] to save a selection. Press the [Menu] key to continue. Press the [Online] key to exit from the menu.

Table 101 shows the correct option settings for use with CCR.

Table 101

LaserJet series IV printer switch settings

Press [Menu] key to see the			Press [Menu] key once to see
Printing Menu			the PCL Menu
COPIES	=	01	FONT SOURCE	=	1
PAPER	=	LETTER	FONT NUMBER	=	45
ORIENTATION	=	P	SYM SET	=	ISO L1
FORM	=	66	PAGEPROTECT	=	OFF
MANUAL FEED	=	OFF	RESOLUTION	=	300
RET	=	DARK	TIMEOUT	=	15

Press [Menu] key twice to see			Press [Menu] key three times to
the Configuration Menu			see the Printing Menu
MP TRAY	=	CLASS	SERIAL	=	RS-232
LOCK	=	NONE	PACING	=	XON/XOFF
CLR WARN	=	ON	BAUD RATE	=	9600
AUTO CONT	=	ON	ROBUST XON	=	ON
DENSITY	=	3	DTR POLARITY	=	HI
LOW TONER	=	ON

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide