Meridian America Link/Customer Controlled Routing manual System console cabling Application Module

248Chapter 9: Meridian Link/CCR interface cabling

System console cabling (Application Module)

As shown in Figures 65Ð74, the system console connects to the MVME712 transition card at

¥J7 on the I/O subpanel

¥SYS CONS port on the universal I/O panel

¥card 1 conn 1 on the generic I/O panel

Use a customer-supplied cable (or an extra NT7D61) with a 9-pin female and 25-pin male connector from the console to the Application Module. Table 83 lists the pin assignments required for the cable.

Table 83

System console cable pinout

Meridian 1	Signal	AM (J7) 9-pin connector
2	TXD	3
3	RXD	2
4	RTS	7
5	CTS	8
6	DSR	6
7	LRTN	5
8	DCD	1
20	DTR	4
1	GND	9

553-3202-210 Standard October 1998