Meridian America Link/Customer Controlled Routing manual Dte/Dce

Chapter 15: Link configuration 493

Procedure 14: Changing Meridian Link (link 1) parameters (continued)

Table 142

X.25 and LAPB parametersÑLink 1 (continued)

Link parameter	Allowed values	Description
	(defaults in parentheses)
Incoming window size	1Ð(2)Ð7	Maximum number of outstanding
		incoming packets without an
		acknowledgment
Outgoing window size	1Ð(2)Ð7	Maximum number of outstanding
		outgoing packets without an
		acknowledgment
Throughput	(0)Ð1	Specify whether throughput negotia-
negotiation used		tion may be used: 0 = no; 1 = yes
Incoming throughput	3Ð(10)Ð12	Maximum amount of incoming
class		information on a connection basis,
		meaningful only if Throughput
		Negotiation Used is set to yes.
Outgoing throughput	3Ð(10)Ð12	Maximum amount of outgoing
class		information on a connection basis,
		meaningful only if Throughput
		Negotiation Used is set to yes.
Lowest LCN for	(-1)	Specifies the lowest X.25 virtual circuit
DTE/DCE*		number that will be assigned for an
		incoming (if DTE) or outgoing (if DCE)
		X.25 call request. Not used by the AM.
		Default value is Ð1.
Highest LCN for	(-1)	Specifies the highest X.25 virtual circuit
DTE/DCE*		number that will be assigned for an
		incoming (if DTE) or outgoing (if DCE)
		X.25 call request. Not used by the AM.
		Default value is Ð1.
Note: Parameters marked with an asterisk (*) cannot be changed.
	Ñ continued Ñ

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide