Meridian America Link/Customer Controlled Routing manual Additional time zone menu, DST prompt

454Chapter 14: Software installation, upgrade, and update procedures

Procedure 7: Reboot and go through setup (continued)

9At the ÒEnter zone number:Ó prompt, type the number corresponding to your time zone and press [Return].

If your time zone is not listed in time zones 1Ð12, type 13 and press [Return]. You will see explanatory messages. At the ÒEnter 3-letter time-zone-nameÓ prompt (Figure 210), type three letters to represent your time zone and press [Return]. At the ÒEnter time difference from GMTÓ prompt, type the difference between your local time and Greenwich Mean Time (GMT). Use a minus if your time zone is west of GMT.

Figure 210

Additional time zone menu

Enter 3-letter time-zone-name (a thru z or A thru Z)

Enter time difference from GMT (use Ò-Ó if west of GMT)

Figure 211

DST prompt

Does your time zone use Daylight Savings Time during the year? [y, n, ?, q]

10You are prompted to indicate whether your time zone uses Daylight Savings Time during the year. Type in your response (y if Daylight Savings Time applies, n if it does not) and press [Return].

The system response reflects whether or not the Daylight Savings Time selection was changed.

Figure 212

Date and time change prompt

Time zone now changed.

Note: Any logins and processes running when the time zone changes, and all their child processes, will continue to see the old time zone.

The cron will be restarted at the end of this procedure. Current date and time: Tue. 06/29/93 09:37

Change the date and time? [y, n, ?, q]

553-3202-210 Standard October 1998