Meridian America Link/Customer Controlled Routing Date and time set prompt, UserÕs name prompt

456Chapter 14: Software installation, upgrade, and update procedures

Procedure 7: Reboot and go through setup (continued)

16When prompted, type the minutes and press [Return].

Figure 218

Date and time set prompt

Date and time will be set to: 6/29/93 09:37. OK? [y, n, q]

17You are prompted to confirm the date and time. Type y and press [Return].

Once the application starts, the time will be set to the time on the Meridian 1. The system response reflects any time or time zone change with a Òcron abortedÓ message.

Figure 219

Time change confirmation

Sat Sep 18 11:19:00 EDT 1993

The date and time are now changed. cron aborted: SIGTERM

The cron has been restarted to pick up the new time and/or time zone.

The next step is to set up logins.

The first one you make should be for yourself.

Anytime you want to quit, type "q".

If you are not sure how to answer any prompt, type "?" for help, or see the AdministratorÕs Guide.

If a default appears in the question, press <RETURN> for the default.

Note: Ensure that you respond with q to the remaining prompts. Entering any other data may prevent applications from functioning properly.

Figure 220

UserÕs name prompt

Enter userÕs full name [?, q]:

18You are prompted to enter a user login name. Type q and press [Return].

553-3202-210 Standard October 1998