Meridian America Link/Customer Controlled Routing manual Port configuration Prompt Response

	Chapter 19: Single Terminal Access 543
Table 149
Port configuration
Prompt	Response
PORT TYPE	System
PORT NAME	Meridian Link/CCR
BAUD RATE	9600
DATA BITS	8
STOP BITS	1
INTERFACE	RS-232 DCE
EMULATION	EM200 8-bit Ctrl
CONNECT SEQUENCE	Ctrl-R (Read the instructions under
	the function keys on how to enter
	this information)
LOGOUT SEQ

Note: Step 20 must be completed for each port connected to a monitored system.

21Click <PF7> to proceed to the Port Maintenance Menu.

22Select ÒEnable portÓ using the up/down arrow keys and press [Return] to enable the Meridian Link/CCR system port.

STA is now available to monitor both Meridian Link/CCR and the Meridian 1. You can access Meridian Link/CCR by pressing the assigned function key as shown on the STA Main Menu. You may have to press [Return] several times to get a response.

23To return to the STA Main Menu, press [ESC] and type STA. Press [Ctrl]+[R] to refresh the screen when needed.

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide