Meridian America Link/Customer Controlled Routing manual Customer number prompts, Commit prompt

506Chapter 16: Additional application configuration

Procedure 19: Change the Meridian 1 customer number

When you order CCR, you specify the customer number for the Meridian 1 system to which the CCR Module or IPE Module will be connected. CCR is thus shipped with the customer number configured. If you want to change the customer number (for example, if you connect the CCR Module or IPE Module to a Meridian 1 system with a different customer number), use this procedure.

1At the ÒConsole Login:Ó prompt, type maint (if you are not already logged in). The default password is maint.

2At the Òmaint>Ó prompt, type applconfig and press [Return].

The following messages appear:

Figure 266

Customer number prompts

Enter a new value to change the following application parameter:

Enter Customer Number value as: 0-99

Enter a return for no change

Change ÔMSL-1 Customer NumberÕ from Ô1Õ to:

3The range of possible values (0Ð99) and the current value are displayed. Type the new customer number and press [Return].

The following message appears.

Figure 267

Commit prompt

Do you want to commit this new value? [y,n]

4Type y and press [Return] to confirm that you will use the new customer number.

553-3202-210 Standard October 1998