Meridian America Link/Customer Controlled Routing QPC513 Esdi card jumper and switch locations

Chapter 8: Hardware installation procedures 149

Figure 41

QPC513 ESDI card jumper and switch locations

Port address switch S2
Jumper		¥
Jumpers for port J1.	DCE
	DTE
The port is always the
lower, even number.	DCE
	DTE
Jumpers for port J2.	DCE
	DTE
The port is always the
higher, odd number.	DCE
	DTE

QPC513G Style B

1234

¥

ON

RS-232

HS (RS-422)

RS-232

HS (RS-422)

RS-232

HS (RS-422)

RS-232

HS (RS-422)

Note 1: Place jumper plugs in sockets as shown. This selects the DCE and RS-232 options.

Note 2: This figure shows both high and low ports. Configure only the port you are going to use.

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide