Meridian America Link/Customer Controlled Routing manual =Hdlc, Lapb, Ddn Usa

486Chapter 15: Link configuration

Procedure 13: Changing AML (link 0) parameters (continued)

Table 141

AML (link 0) parameters

Link parameter	Allowed values		Description
	(defaults in parentheses)
Protocol*	(HDLC)	Link protocol used
Link type*	(1)	Type of link (1=AML)
Machine ID	(SL16)	Logical name assigned to the
		attached Meridian 1
Delay	(0)Ð9999	Maximum time (in seconds)
		between packet transmissions
Port type*	(H)	H=HDLC
Physical DTE/DCE	0, 1	0 if link port is configured as
		DTE; 1 if the port is configured
		as DCE
PDN type	0, 40Ð48	Packet data network type. This
		parameter is dependent on the
		type of network configured.
		The possible values are:
		0 Ñ LAPB
		40	Ñ Datex-P (Germany)
		41	Ñ Transpac (France)
		42	Ñ PPS (United Kingdom)
		43	Ñ Datapak (Sweden)
		44	Ñ Telenet (USA)
		45	Ñ DDN (USA)
		46	Ñ Accunet (USA)
		47	Ñ Datapac (Canada)
		48	Ñ Tymnet (USA)
		The default values are 0 for
		LAPB and 44 for X.25.
Note: Parameters marked with an asterisk (*) cannot be changed.
	Ñ continued Ñ

553-3202-210 Standard October 1998