Meridian America Link/Customer Controlled Routing manual Only parameters

492Chapter 15: Link configuration

Procedure 14: Changing Meridian Link (link 1) parameters (continued)

Table 142

X.25 and LAPB parametersÑLink 1 (continued)

Link parameter	Allowed values	Description
	(defaults in parentheses)
Maximum trans attempts	1Ð(8)Ð9999	Maximum number of retries to
(N2)		complete a transmission; must
		be identical to the number
		specified on the host computer
		configuration
Local DTE address	000000990100	X.25 Òcall requestÓ address that
		identifies the AM. When the host
		sends the X.25 call request
		packet to set up the SVC, it must
		specify the AMÕs local DTE
		address. The default value is
		000000990100.
X.25-only parameters:
Flow control negotiation	(0)Ð1	An X.25 service that allows flow
		control parameters (packet size
		and window size) to be
		negotiated between the host and
		the AM. Not supported by the
		AM. Default value is 0 (no flow
		control negotiation). Use flow
		control negotiation (packet size
		and window size) 0 = no;
		1 = yes.
Incoming packet size	16 32 64 (128) 256 512	Maximum X.25 packet size; must
	1024 2048 4096	be identical to the size specified
		on the host computer
		configuration
Outgoing packet size	16 32 64 (128) 256 512	Maximum X.25 packet size; must
	1024 2048 4096	be identical to the size specified
		on the host computer
		configuration
	Ñ continued Ñ

553-3202-210 Standard October 1998