Meridian America Link/Customer Controlled Routing manual

502Chapter 15: Link configuration

Procedure 17: Creating a configuration file (continued)

Figure 263

Change linkctl

mlusr>	change linkctl
Current Control File Image
0	HDLC	/usr/mlusr/conf/hdlcmlnk.datafile
1	X25	/usr/mlusr/conf/x25hlnk.datafile
2	ASYNC	/usr/mlusr/conf/vlink.datafile

Current Entry > 0		HDLC	/usr/mlusr/conf/hdlcmlnk.datafile
Type :	"delete" to remove
	"<ret>" to keep as is,
	"<link number> <link type> <file name>" to change
Entry > <cr>
Current Entry > 1		X25	/usr/mlusr/conf/x25hlnk.datafile
Type :	"delete" to remove
	"<ret>" to keep as is,
	"<link number> <link type> <file name>" to change

Entry > 1 X25 /usr/mlusr/conf/filename.datafile <cr>

Note: When typing the information, the entries HDLC, X25 and ASYNC must be in uppercase and the pathname of the file must be in all lowercase. The number of spaces between each parameter doesnÕt matter. Do not type any control characters or escape sequences.

New Entry
Type :	"<ret>" end changes
	"<link number> <link type> <file name>" add entry
Current Entry > 2		ASYNC	/usr/mlusr/conf/vlink.datafile
Type :	"delete" to remove
	"<ret>" to keep as is,
	"<link number> <link type> <file name>" to change
Entry> <cr>
New Control File Image:
0	HDLC		/usr/mlusr/conf/hdlcmlnk.datafile
1	X25		/usr/mlusr/conf/filename.datafile
2	ASYNC		/usr/mlusr/conf/vlink.datafile
Confirm?	(yes or no):

5Type yes and press [Return] to confirm that you wish to save your changes to the link control file.

Any time the system is restarted, the link parameters will be read from your configuration file.

553-3202-210 Standard October 1998