Meridian America Link/Customer Controlled Routing manual Risk of equipment damage

116Chapter 7: Unpack and inspect hardware

¥Store circuit packs in a clean, dry area.

¥When tape cartridges have been subjected to temperature extremes, allow them to stabilize to room temperature before unpacking. This prevents the accumulation of condensation on the tapes.

!

CAUTION

Risk of equipment damage

Wear an antistatic wrist strap when handling components. As an additional safety measure, handle components by their edges and, whenever possible, with the loosened packing material still around them.

Receiving the IPE Module and Application Module components

Use the following procedure to check all items received against the order form and shipper attached to each carton.

1Remove each item from the carton.

2Compare each itemÕs part number against the part number listed on the shipper.

3Verify that the shipped quantity and the quantity received match.

4Verify that the order quantity on the shipper matches the shipped quantity.

5Report all discrepancies to your Nortel support personnel. Use the NTI number in the top right corner of the shipper as a reference.

553-3202-210 Standard October 1998