Meridian America Link/Customer Controlled Routing manual Link configuration

Chapter 15: Link configuration 487

Procedure 13: Changing AML (link 0) parameters (continued)

Table 141

AML (link 0) parameters (continued)

Link parameter	Allowed values	Description
	(defaults in parentheses)
Maximum Frame Length	(135)
Baud rate	300 600 1200 2400 4800	Must be identical to that specified
	9600 (19200) 38400 48000	on the Meridian 1 or host
	56000 64000	computer configuration; if
		modems are used, must also
		match baud rate of the modem
Fail timer	0Ð(50)Ð9999	Timer value (in 1/10 second
		increments) for monitoring the
		signals that indicate link failure
RFS timer	0Ð(150)Ð9999	Timer value (in 1/10 second
		increments) for monitoring CTS
		or DTR signals after line opening
Internal address	(1), 3	1 for DCE; 3 for DTE
Remote address	1, (3)	3 for DCE; 1 for DTE. (This value
		must be different from the value
		of the internal address. The
		combination of values for internal
		address and remote address
		must be the opposite of the
		values for the host. That is, if the
		values for the host are 3, 1, the
		values for the link must be 1, 3.)
T1	0Ð(20)Ð9999	Frame recovery time (in 1/10
		second increments); must be
		identical to the time specified on
		the host computer configuration
	Ñ continued Ñ

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide