Meridian America Link/Customer Controlled Routing Cls Ndd, CLS Dndd, Itna NO, YES, Dgrp, Key

352Chapter 12: Meridian 1 configuration for Meridian Link/CCR

Table 133

LD 10ÑCreating a Phantom Set (continued)

Prompt	Response	Comment
CUST	0-99	Customer number
¥		Press [Return] until the CLS prompt
¥		appears.
¥
CLS	NDD	No digit display is recommended if
		configuring phantom devices.
CLS	(DNDD)	Dialed Name Display denied is
		recommended if configuring
		phantom devices.
¥		Press [Return] until the AST prompt
¥		appears.
¥
AST	00	Key 0 is AST.
IAPG	(0)Ð15	Meridian Link Unsolicited Status
		Message (USM) group. These
		groups determine which status
		messages are sent for an AST set.
		The default 0 sends no messages,
		whereas Group 1 sends all
		messages.
ITNA	(NO), YES	Idle TN for third-party application.
		Select YES for Phantom TN.
DGRP	(1)Ð5	Device group with which phantom
		TNs are associated.
¥		Press [Return] until the KEY
¥		prompt appears.
¥
KEY	xx SCR yyyy	Key number, Single Call Ringing,
		DN
CLS	xx RLS	Key number, Releases.
		Ñ end Ñ

553-3202-210 Standard October 1998