Meridian America Link/Customer Controlled Routing manual NTAK19BA

Chapter 9: Meridian Link/CCR interface cabling 171

Figure 43

IPE Module Option 11 connections (Part 2)

Meridian 1 Option 11

NTAK02 Internal

SDI/DCH bus

port 0 port 1

port 2

port 3

J2-9 (Note 1)

			IPE
			Module
Method 3
port 0
port 2			Connector
NTAK19BA	1		Panel
(4-port	3
	5	NT1R03AA	NT1R03CA
cable)		(octopus	(extension
	7
port 1		cable)	cable)
port 3

Connect an SDI port to port 3 for conshare and an ESDI port to port 5 for AML (link 0) (Note 3)

Note 1: It is recommended that the TDS/DTR card be installed in position 1. The SDI/DCH card may be installed in any other position except position 0 (for the CPU/Conf card).

Note 2: Refer to the Meridian 1 Option 11 Installation Guide (NTP 553-3011-210) for cross connections.

Note 3: Use an NT1R03D extension cable if you need additional length.

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide