Meridian America Link/Customer Controlled Routing Secu YES, Intl, Mcnt, Conf DIR, Vsid VAS Csqi

Chapter 12: Meridian 1 configuration for Meridian Link/CCR 301

Table 106

LD 17ÑConfigure ESDI port (Options 21Ð81) (continued)

Prompt	Response	Comment
CMS	x	ESDI port number for this AML. This must
		be the same as the port number defined at
		the ADAN prompt.
SECU	YES	Security for AML. Must be set to Yes.
INTL	4	Time interval (five-second increments) used
		to determine overload conditions
MCNT	400	Message count threshold for number of
		messages per time interval (from INTL)
CONF	DIR	Direct link for this AML configuration
CMS	<cr>	ESDI port number for CSL (0Ð15)
VSID	<cr>
VAS	<cr>
CSQI	(20)Ð255	Maximum call registers for AML input
		queues
CSQO	(20)Ð255	Maximum call registers for AML output
		queues
		Set CSQI and CSQO equal to the number of
		ACD agents or AST sets, or 50 whichever is
		larger, but not more than 25 percent of the
		total number of call registers (NCR prompt).
¥		Press [Return] until the REQ prompt
¥		appears
¥
REQ	END	Either change more configuration data or
		exit the overlay, saving changes to the
		configuration record.
		Ñ end Ñ

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide