Meridian America Link/Customer Controlled Routing manual Cr Type a period and press Return

432Chapter 14: Software installation, upgrade, and update procedures

Procedure 6: Load the operating system tape on an IPE Module or an Application Module with an MVME167 card (continued)

Figure 175

Environment prompts (MVME167 card)

Bug or System environment [B/S] = S? <cr>

Field Service Menu Enable [Y/N] = Y? <cr>

Remote Start Method Switch [G/M/B/N] = B? <cr>

Probe System for Supported I/O Controllers [Y/N] = Y? <cr>

Negate VMEbus SYSFAIL* Always [Y/N] = N? <cr>

Local SCSI Bus Reset on Debugger Start-up [Y/N] = Y? <cr>

Local SCSI Bus Negotiations Type [A/S/N] = A? <cr>

Note: The prompt ÒLocal SCSI Bus Negotiations TypeÓ may not appear for all MVME167 cards.

Ignore CFGA Block on			a Hard Disk Boot [Y/N] = Y? <cr>
Auto Boot		Enable [Y/N] = Y?		<cr>
Auto	Boot	at power-up only [Y/N] = N? <cr>
Auto	Boot	Controller	LUN = 00?	. <cr> (Type a period and press [Return].)

Note: If you changed or reentered any values in Figure 175, you will see two additional prompts, to which you should respond as shown in the following figure.

Figure 176

Additional prompts (MVME167 card)

Update Non-Volatile RAM (Y/N)?

Reset Local System (CPU) (Y/N)?

y<cr>

y <cr>

6The system reboots automatically. Messages start to appear on the console. Type h as soon as messages start appearing on the console.

The start-up interrupt menu appears.

553-3202-210 Standard October 1998