Water connection to the refrigerator
Please follow the instructions carefully.
Connection of the Water Pipe to the Refrigerator
1.After installing the union onto the water pipe, fit the water pipe to the refrigerator inlet valve by pressing downwards firmly.
2.Fit the union as seen in the above figure, by squeezing it by hand onto the refrigerator inlet valve.
Parts:
a- Water Pipe,
b- Union,
c- Valve
Note:
You should not need to tighten the union with a tool to achieve a water tight assembly.
In case of a leak use a correctly sized spanner to tighten the union.
Connection of Water Hose to a Jug
(in some models)
To connect water to the refrigerator from a jug, a pump is needed.
Follow the instructions below. Start by connecting one end of the water pipe from the outward flow of the pump and the other end onto the refrigerator inlet valve as described on the “water connection to the refrigerator”.
1.Complete the connection by pushing the pump inlet water pipe into the inlet of the pump as shown in figure A.
2.Place and fix the pump pipe into the jug as shown in figure A.
3.After completing the connection, plug in and run the pump.
To ensure efficient operation of the pump, wait for 23 minutes after starting the pump.
FIGURE A
Note:
Please refer to your pump user manual whilst making the water connection. There is no need of a water filter when a jug is used. A pump must be used when using a jug.
PAGE 12
