Multi-Tech Systems 7500, 7600 manual To configure ION module setup registers with Designer

ION 7500 / ION 7600 User’s Guide Changing Setup Registers with Designer

To configure ION module setup registers with Designer

1.Right-click near the module’s center. The ION Module Setup dialog box appears, showing a list of setup registers available for configuration.

The list of available Setup registers appears here. Select a Setup register, then click Modify... (or double click on the Setup register name).

2.Highlight the Setup register you want to configure, and click Modify.... A Modify Register dialog box appears.

A drop down list of option appears when you click on the arrow because this setup register is of the enumerated type.

Make the change to the register’s setting here. As there are different types of data held in setup registers, there are different Modify Register dialog boxes. The Modify Register dialog box may require that you choose an option from a list or enter a numeric value.

A format option is available when modifying Numeric Bounded setup registers.

Clicking Format causes a “Formatted Numeric Value” window to appear:

Chapter 4 - Using ION Software Page 109