Multi-Tech Systems 7500, 7600 manual Factory Terminal Menu, Factory Terminal menu options are

ION 7500 / ION 7600 User’s Guide Factory Terminal Menu

Factory Terminal Menu

The Factory Terminal menu options are:

?Display Help Screen

ALL?	Display All Commands
COMM?	Display Comm Help Screen
MISC?	Display Misc Help Commands
RESET	Display Reset Help Commands
SEC?	Display Security Help Screen
TIME?	Display Time Help Screen
KAL?	Display Calibration Help Screen
LOGIN	Factory login
LOGOUT	Logout

Display Help Screen – select this option to display the Factory Terminal menu (menu displayed above).

Display All Commands – select this option to display every Terminal Command that can be used in HyperTerminal.

Display Comm Help Screen – this option is not used if your meter is connected serially to your workstation.

Display Misc Help Screen – this option lists commands that allow you to repeat the last command, and display the battery statistics, meter release version, and meter firmware version.

Display Reset Help Screen – if your security level allows you to perform resets then this screen lists the following options: full or partial factory initialization; restore the factory framework; read power-up style; and reset fatal error.

Display Security Help Screen – select this option to enable/disable password or hardware security, or read the meter lock state.

Display Time Help Screen – select this option to set or display the meter time, and human meter time:

meter time: Unix time (seconds since January 1, 1970)

human meter time: day/month/year and hour:minute:second

Display Calibration Help Screen – select this option to display or configure meter calibration parameters.

Factory Login – this menu is reserved for Technical Services use.

Logout – select this option to logout of the meter, and end the HyperTerminal session.

Telnet and HyperTerminal Access Technical Note Page 335