Multi-Tech Systems 7600 manual Logging Configurations for ION 7500 Revenue Applications

Logging Configurations for ION 7500 Revenue Applications ION 7500 / ION 7600 User’s Guide

Logging Configurations for ION 7500 Revenue Applications

You can alter the logging capacity of your ION 7500 meter, if it is being used for revenue applications. A suggested configuration is shown in the table below. To make use of the suggested revenue logging configuration, you must make all of the changes outlined below.

The following configuration does not apply to the ION 7600 meter, as it has a specific Revenue Log (see Chapter 2 for more details). This configuration is for an ION 7500 with standard 1Mb log memory.

Log	Depth	Interval	ION Modules Requiring Settings Changes
Revenue Log	760	35 days	Data Recorder module “Revenue Log”
			Periodic Timer module “Revenue Log Trg”
Loss Log	760	35 days	Data Recorder module “Loss Log”
			Periodic Timer module “Loss Log Trg”
Time Of Use	20	Triggered	No changes required
Data Recorders		on demand
			Data Recorder modules “Hist mean Log,” “Hist
Historic Logs	192	2	high Log,” and “Hist low Log”
			Periodic Timer module “Hist Log Trig”
			Data Recorder modules “Harm mean Log” and
Harmonics Logs	48	2	“Harm high Log”
			Periodic Timer module “Harm Log Trig”
Waveform recording	5	Triggered	Data Recorder module “EgyDmd Log”
		on demand
Report Generator Log	192	2	Data Recorder module “EgyDmd Log”
			Periodic Timer module “EgyDmd Log Trig”
Sag/Swell Log	100	Triggered	No changes required
		on demand
Event Log	500	Triggered	No changes required
		on demand

Page 152 Chapter 5 - Features and Applications