Paradyne CSU, DSU, 9126-II, 9128-II manual Verification Options, in , Configuration Options, over

7. Operation and Maintenance

Table 7-16. SLV Performance Statistics for Multiplexed DLCI (3 of 3)

Statistic	What It Indicates
Latest RdTrip Latency	Current round trip latency, measured in milliseconds, between
	the FrameSaver unit and the device at the other end of the
	multiplexed DLCI connection.
	“--”appears if communication with the far-end device is not
	successful.
Avg RdTrip Latency	Average round trip latency, measured in milliseconds, between
	the FrameSaver unit and the device at the other end of the
	multiplexed DLCI connection.
	Average round trip latency is measured every SLV sampling
	interval and the average is computed (using packets with the
	configured SLV Packet Size (bytes), Table 4-4, Service Level
	Verification Options, in Chapter 4, Configuration Options,) over
	the previous 15 samples. If SLV Packet Size is changed, a new
	average is not available until a new sample has been received.
	“--”appears if communication with the far-end device over the
	last 15 samples has not been successful.
Max RdTrip Latency	Same as average (Avg RdTrip Latency), but storing the
	maximum value of latency over the previous 15 samples.
	“--”appears if communication with the far-end device over the
	last 15 samples has not been successful.

*Only appears for FrameSaver units when the SLV Delivery Ratio option is enabled.

7-54 September 2002 9128-A2-GB20-80