Paradyne CSU, DSU, 9126-II, 9128-II manual Verification Options, in , Configuration Options, must

7. Operation and Maintenance

Table 7-16. SLV Performance Statistics for Multiplexed DLCI (2 of 3)

Statistic	What It Indicates
Inbound Dropped	otal number of frames transmitted by the far-end device that
Frames*	were dropped in transit.
	he counts continue to increment until the maximum value is
	reached (232 –2), then the count starts over.
	he SLV Delivery Ratio option (see Table 4-4, Service Level
	Verification Options, in Chapter 4, Configuration Options,) must
	be enabled for these statistics to appear.
Above CIR*	The number of frames transmitted by the far-end device that
	were above the committed information rate and were
	dropped in transit.
Within CIR *	The number of frames transmitted by the far-end device that
	were within the committed information rate, but were dropped
	in transit.
Between CIR&EIR *	The number of frames transmitted by the far-end device that
	were between the committed information rate and excess
T	information rate, and were dropped in transit.
Above EIR *	TThe number of frames transmitted by the far-end device that
	were above the excess information rate and were dropped in
	transit.
Inbound Dropped	otal number of bytes transmitted by the far-end device that
Characters *	were dropped in transit.
	he counts continue to increment until the maximum value is
	reached (232 –2), then the count starts over.
	he SLV Delivery Ratio option (see Table 4-4, Service Level
	Verification Options, in Chapter 4, Configuration Options,) must
	be enabled for these statistics to appear. NA appears instead of
	a statistical count if FDR/DDR (Frame Delivery Ratio/Data
	Delivery Ratio) information is not being received from the
	far-end device.
Above CIR *	The number of bytes transmitted by the far-end device that
	were above the committed information rate and were
	dropped in transit.
Within CIR *	The number of bytes transmitted by the far-end device that
	were within the committed information rate, but were dropped
	in transit.
Between CIR&EIR *	The number of bytes transmitted by the far-end device that
	were between the committed information rate and excess
T	information rate, and were dropped in transit.
Above EIR*	TThe number of bytes transmitted by the far-end device that
	were above the excess information rate and were dropped in
	transit.

*Only appears for FrameSaver units when the SLV Delivery Ratio option is enabled.

9128-A2-GB20-80 September 2002 7-53