Paradyne 9126-II, CSU, DSU Trap warmStart, Trap authenticationFailure, Variable-Binding, String

B. SNMP MIBs and Traps, and RMON Alarm Defaults

Trap: warmStart

This trap indicates that the FrameSaver unit has been reset and has stabilized.

Table B-3. warmStart Trap

Trap	What It Indicates	Possible Cause
		T
warmStart	FrameSaver unit has just	Reset command sent.
	reinitialized and stabilized itself.	Power disruption.
	Variable-Binding	String:
		‘Unit reset.’
	devLastTrapString
	(devHealthAndStatus. mib)

Trap: authenticationFailure

This trap indicates that access to the FrameSaver unit was unsuccessful due to lack of authentication.

Table B-4. authenticationFailure Trap

Trap	What It Indicates	Possible Cause
authenticationFailure	Access to the FrameSaver	Bad password on COM port
	unit was attempted and	terminal.
	failed.	String:
		‘Unauthorized access
		attempted from COM port.’
		Bad password on modem port
		terminal.
		String:
		‘Unauthorized access
		attempted from modem port.’
		Bad password through telnet.
		String:
		‘Unauthorized access
		attempted from telnet user at
		T$ipAddress.’
		SNMP bad community,
		unauthorized IP address, or
		unauthorized operation.
		String:
		‘Unauthorized access
		attempted from SNMP user at
		$ipAddress.’
authenticationFailure	Variable-Binding	TAn ISDN backup call has been
		received, but the call was
	devLastTrapString
		rejected.
	(devHealthAndStatus.mib)	String:
		‘Bad Caller ID $phone.’
		($phone is either a phone
		number or “no number.”)

9128-A2-GB20-80 September 2002 B-9